![]() ![]() The applicable reference paragraph is CS 25.1301, 25.1541. The placarding requirements are related to the general certification requirements on placarding and intended function in accordance with Certifications Specifications and Acceptable Means of Compliance for Large Aeroplanes CS-25 ( ED Decision 2012/008/R) and the marking requirements as specified in the approval of the equipment. bulkhead) or a clearly visible instruction advising on the same must be in place on the baby bassinet itself.īecause of the standard fixation of the unit, they are not stable during turbulence, they may swing up and down, and therefore they must be stowed during turbulence. Placards advising on their stowage during taxi, take-off, landing and turbulence are required either at the location where baby bassinets will be fixed to the aircraft structure (e.g. Certification of products and organisationsīaby bassinets are currently included in a certification process of the particular aircraft in which they will be installed baby bassinets are not certified as a separate device and they are not certified for taxi, take-off, landing and turbulent weather conditions.Certification Support for Validation (CSV).Alternative Method of Compliance (AMOC) to an Airworthiness Directive (AD).Acceptable Means of Compliance (AMC) and Alternative Means of Compliance (AltMoC).Drones with class identification label C0-C6.Provisions applicable to both ‘open’ and ’specific’ category.Airspace Usage requirements – DLS/CPDLC.Airspace Usage Requirement (ACAS II v7.1).Flight Simulation Training Devices (FSTD).Performance-based Navigation applicability. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |